Whole house generator installation in Fanwood
We begin with what you want running in an outage, then size the generator to match. The installation covers the pad, the automatic transfer switch, the wiring to your panel and start-up testing. We coordinate the natural gas or propane connection. For portable generators we fit an inlet and an interlock so you can power the panel safely without backfeeding the line.
We also get calls from Fanwood for Generac installation, standby generator installation and backup generator electrician. If you are not sure which one you need, describe the problem and we will tell you.
What is included
- Load sizing for whole house or essential circuits
- Standby generator set on a pad
- Automatic transfer switch
- Coordination of the gas or propane connection
- Portable generator inlet and interlock kits
- Start-up, testing and owner walk-through
Signs you need generator installation
- You have a sump pump, well pump or medical equipment
- Outages in your area last hours, not minutes
- You work from home
- You have been running extension cords from a portable generator
Not sure if this is what you need? Call (888) 633-7804, tell us what is happening in your Fanwood home or business, and we will point you to the right service.
From first call to finished job
- We visit the property in Fanwood, look at the existing equipment and run a load calculation.
- You get a written, itemized price.
- We file for the permit and schedule the utility where the job needs it.
- We do the work in planned stages so you are without power as little as possible.
- The job is inspected, and we walk you through the finished work.
Generator installation cost in Fanwood
Generator installation cost in Fanwood depends on the generator size, the distance to the gas meter and the panel, and the type of transfer switch. We survey the site and give you a full installed price.
Generac installation near Scotch Plains and Westfield
Our electricians cover every part of Fanwood, Union County, including ZIP code 07023. We also take calls for generator installation in nearby Scotch Plains, Westfield, Plainfield and Mountainside.
Much of Union County was built before 1960: colonials, capes, two-family houses and brick apartment buildings with plaster walls. For an electrician that usually means 60 or 100 amp service, a mix of old cloth-covered cable and newer wire, and panels that were never meant to carry central air, an induction range and a car charger at the same time. We see it every week around Fanwood and we plan the work around it.
If you searched for “standby generator installation near Fanwood”, one more thing worth knowing: we coordinate with PSE&G, JCP&L, Atlantic City Electric, Rockland Electric or a municipal utility when a job needs the power company involved, so you do not have to.
Generator Installation in nearby towns
- Generator Installation in Scotch Plains
- Generator Installation in Westfield
- Generator Installation in Plainfield
- Generator Installation in Mountainside
- Generator Installation in Garwood
- Generator Installation in Watchung
- Generator Installation in Berkeley Heights
- Generator Installation in New Providence
Generator installation in Fanwood: common questions
What size generator do I need?
It depends on what you want to run. Many homes are served by a 14 to 26 kW unit. We calculate it from your actual loads.
Which brands do you install?
Generac, Kohler and other major standby brands, along with transfer switches for portable units.
Is it safe to plug a portable generator into a dryer outlet?
No. That backfeeds the utility line and can kill a line worker. An inlet with an interlock or transfer switch is the safe way.
Which towns near Fanwood do you serve?
We also work in Scotch Plains, Westfield and Plainfield and the rest of Union County.
Do you cover all of Fanwood?
Yes. We work throughout Fanwood and Union County, including ZIP code 07023.