Sub Panel Installation in Salem, NJ

Sub panel installation in Salem

We size the sub panel and its feeder from the loads it will serve, confirm the main panel can supply it, and run the feeder by the cleanest route. Neutrals and grounds are kept separate at the sub panel, and detached buildings get their own grounding electrodes.

People in Salem ask for this in different ways: basement sub panel, garage sub panel and subpanel installation, or simply “sub panel installation near me”. It is all work we do, and one call to (888) 633-7804 covers it.

What is included

Load check on the main panel
Feeder cable or conduit sized for the sub panel
60, 100 or 125 amp sub panel
Correct separation of neutrals and grounds
Ground rods for detached buildings
Labeled circuits and inspection

Do you need sub panel installation? Four signs

The main panel has no open slots
You are finishing a basement or building an addition
A detached garage or shed needs real power
Tandem breakers have been used to squeeze circuits in

Not sure if this is what you need? Call (888) 633-7804, tell us what is happening in your Salem home or business, and we will point you to the right service.

From first call to finished job

We visit the property in Salem, look at the existing equipment and run a load calculation.
You get a written, itemized price.
We file for the permit and schedule the utility where the job needs it.
We do the work in planned stages so you are without power as little as possible.
The job is inspected, and we walk you through the finished work.

Sub panel installation cost in Salem

Sub panel installation cost in Salem comes down to the feeder length, the panel size and whether trenching or conduit is involved.

Basement sub panel near Quinton and Alloway

Our electricians cover every part of Salem, Salem County, including ZIP code 08079. We also take calls for sub panel installation in nearby Quinton, Alloway, Hancocks Bridge and Pennsville.

Salem County has a lot of mid-century housing: ranches and split-levels from the 1950s through the 1970s. Some of those homes were wired with aluminum branch circuits, and many still have the original 100 amp panel. Both are fixable, and we do that work around Salem regularly.

Searching for “garage sub panel near me” from Salem? You have found a local crew. Call (888) 633-7804.

Sub Panel Installation in nearby towns

Sub panel installation in Salem: common questions

Does a sub panel add capacity to my house?

No. It adds breaker spaces, not amps. If the service itself is too small, the fix is a service upgrade.

Can a sub panel go in a detached garage?

Yes. It needs a properly sized feeder, a disconnect and its own grounding.

How far can it be from the main panel?

As far as needed. For long runs we size the wire up to limit voltage drop.

Which towns near Salem do you serve?

We also work in Quinton, Alloway and Hancocks Bridge and the rest of Salem County.

Do I need a permit for electrical work in Salem?

New circuits, panel changes and service work generally need a permit from the local construction office. Simple like-for-like replacements usually do not. We tell you when your job needs one.

What customers say

Our old 100 amp panel was full and warm. They upgraded us to 200 amps in one day, labeled every breaker and dealt with the utility and the inspection. Power was back before dinner.
James K., Toms River

Eight recessed lights in a finished ceiling and not one patch needed. They laid out the spacing with me first, and the dimmer does not flicker. The kitchen looks twice the size.
Linda W., Freehold

Our house had aluminum wiring and the outlets were getting warm. They went through every box in the house and explained both options and the price for each. Very straight with us.
Tom R., Cherry Hill

All electrical services in Salem, NJ

Panel directorySalem, NJ 08079