Standby generator installation in Hillside
We begin with what you want running in an outage, then size the generator to match. The installation covers the pad, the automatic transfer switch, the wiring to your panel and start-up testing. We coordinate the natural gas or propane connection. For portable generators we fit an inlet and an interlock so you can power the panel safely without backfeeding the line.
We also get calls from Hillside for whole house generator installation, Generac installation and generator installation. If you are not sure which one you need, describe the problem and we will tell you.
What is included
- Load sizing for whole house or essential circuits
- Standby generator set on a pad
- Automatic transfer switch
- Coordination of the gas or propane connection
- Portable generator inlet and interlock kits
- Start-up, testing and owner walk-through
Do you need generator installation? Four signs
- You have a sump pump, well pump or medical equipment
- Outages in your area last hours, not minutes
- You work from home
- You have been running extension cords from a portable generator
Not sure if this is what you need? Call (888) 633-7804, tell us what is happening in your Hillside home or business, and we will point you to the right service.
How the job goes, step by step
- We visit the property in Hillside, look at the existing equipment and run a load calculation.
- You get a written, itemized price.
- We file for the permit and schedule the utility where the job needs it.
- We do the work in planned stages so you are without power as little as possible.
- The job is inspected, and we walk you through the finished work.
Generator installation cost in Hillside
Generator installation cost in Hillside depends on the generator size, the distance to the gas meter and the panel, and the type of transfer switch. We survey the site and give you a full installed price.
Whole house generator installation near Irvington and Union
Whether you are in the center of town or out toward Irvington, it is the same crew and the same number: (888) 633-7804. We serve ZIP code 07205 and the neighboring towns of Irvington, Union, Elizabeth and Maplewood.
North Jersey is densely built, and that shapes the work. Panels sit in shared basements, meters hang in narrow side yards, and a shutdown can affect more than one family. Our crews work in Union County's houses, multi-family buildings and storefronts every week, so jobs in Hillside are staged to keep disruption short and common areas clean.
If you searched for “Generac installation near Hillside”, one more thing worth knowing: we coordinate with PSE&G, JCP&L, Atlantic City Electric, Rockland Electric or a municipal utility when a job needs the power company involved, so you do not have to.
Generator Installation in nearby towns
- Generator Installation in Irvington
- Generator Installation in Union
- Generator Installation in Elizabeth
- Generator Installation in Maplewood
- Generator Installation in Roselle Park
- Generator Installation in Newark
- Generator Installation in Vauxhall
- Generator Installation in Roselle
Generator installation in Hillside: common questions
What size generator do I need?
It depends on what you want to run. Many homes are served by a 14 to 26 kW unit. We calculate it from your actual loads.
Which brands do you install?
Generac, Kohler and other major standby brands, along with transfer switches for portable units.
Is it safe to plug a portable generator into a dryer outlet?
No. That backfeeds the utility line and can kill a line worker. An inlet with an interlock or transfer switch is the safe way.
Do I need a permit for electrical work in Hillside?
New circuits, panel changes and service work generally need a permit from the local construction office. Simple like-for-like replacements usually do not. We tell you when your job needs one.
How do I book an electrician in Hillside?
Call (888) 633-7804. Tell us what is happening and we will set a time.